01 / APPLICATION OVERVIEW
Steel Grating for Industrial Factory Applications in Kenya
Steel grating for industrial factories in Kenya provides load-bearing walkways, platforms, and stair treads for production and maintenance access.
Typical installations include machine service platforms, conveyor routes, warehouse mezzanines, boiler areas, and washdown zones. Open grating allows water and debris to drain through the floor, while removable panels can provide access to equipment, cables, pipes, and inspection points.
Selection should consider uniform and concentrated loads, support spans, bearing direction, allowable deflection, walking surface, and fixing method. For coastal or wet areas, assess humidity, salt exposure, chemicals, coating durability, drainage, and maintenance access before confirming materials and panel details.
Discuss Your Walkway
02 / APPLICATION SCENARIOS & REQUIREMENTS
Application Scenarios & Project Requirements
Review the operating conditions, users, loads, environment and project requirements before selecting the appropriate steel grating specification.
Production Equipment Platforms
Grating platforms around presses, pumps, mixers, and packaging machinery give operators access for inspection and routine service. Panel sections, supports, and fixings should suit the equipment loads, vibration, and clearance requirements shown on the factory layout.
Conveyor and Warehouse Walkways
Elevated walkways beside conveyors and warehouse handling systems support inspection and maintenance along production routes. Open panels allow airflow and drainage, while panel joints and removable sections can be coordinated with transfer points, drives, and service openings.
Boiler and Utility Areas
Grating access platforms around boilers, generators, compressors, and water treatment equipment provide service access at multiple elevations. Select the surface finish for heat, humidity, cleaning methods, and any process chemicals present in the specific area.
Washdown and Process Zones
Serrated grating can be specified for factory zones exposed to washwater, oils, or process residue. Open drainage helps reduce standing water, but layout, cleaning access, and the actual contaminant should be considered when choosing the surface profile.
03 / SPECIFICATIONS & PRODUCT OPTIONS
Common Specifications & Available Options
Compare materials, bearing bar sizes, spacing, surface types, finishes and panel dimensions to match the requirements of the application.
Specifications
| Parameter | Specification / Options |
|---|---|
| Material |
Carbon steel, commonly Q235B, Q355B, ASTM A36, or another project-specified grade. State the material standard and grade on the approved drawings; confirm compatibility with the structural design and site environment. |
| Surface treatment |
Hot-dip galvanized after fabrication for suitable outdoor and humid service; project-specified paint systems or stainless steel may be considered for other exposure conditions. Assess coastal salt, chemicals, temperature, abrasion, and cleaning requirements before selecting a finish. |
| Bearing bar size |
Typical options include 25 × 3, 25 × 5, 30 × 3, 30 × 5, 32 × 5, and 40 × 5 mm. Heavier platform sections may include 50 × 5, 50 × 6, or 60 × 6 mm. Bar depth × thickness. Capacity depends on material, span, spacing, support condition, and loading. |
| Bearing bar spacing |
Common center-to-center pitches include 30, 34.3, and 40 mm. Closer spacing, such as 20 mm, can be specified where smaller openings are required. Clear opening equals pitch minus bar thickness; confirm opening dimensions against access and object-retention requirements. |
| Cross bar spacing | Typical center-to-center pitches include 50 and 100 mm; 50.8 and 101.6 mm series are also available. Identify welded or pressure-locked construction in the specification. |
| Panel dimensions |
Illustrative sizes include 600 × 1,000, 800 × 1,200, 1,000 × 1,000, 1,000 × 1,200, and 1,000 × 3,000 mm. Panels can be fabricated to approved factory drawings. State panel width and bearing bar length separately. Panel dimensions do not establish allowable unsupported span. |
| Walking surface |
Plain or serrated bearing bars. Serrated profiles may be considered for wet, oily, or washdown areas. Verify load data for the selected profile. Slip resistance also depends on contamination, drainage, footwear, and cleaning. |
| Stair treads |
Common fabrication examples include widths of 600, 800, 900, and 1,000 mm, with depths around 240, 270, or 300 mm. End plates and nosings can be supplied to the approved stair design. Confirm tread rise, run, width, and connection details on project drawings. |
| Edges and openings |
Banded edges, reinforced cut-outs, toe plates, and openings for pipes, cables, columns, and equipment are available. Cut bearing bars may need additional support or reinforcement. Coordinate openings with the approved structural layout. |
| Fixings |
Grating clips, bolted retaining plates, or welded connections can be specified. M8 and M10 fasteners are common options when compatible with the selected clamp and support detail. Define fixing type, quantity, position, and material compatibility with the supporting steel and coating. |
| Load and bearing direction |
Bearing bars span between supporting members. Specify clear span in mm, uniform load in kN/m², concentrated load in kN, contact area, and allowable deflection in mm. Check equipment, trolley, and maintenance loads separately. Confirm support and end-bearing details on the drawings. |
Need a different size? Send your layout for a custom panel review.
Request Your SpecificationThe sizes above are reference examples, not approved combinations for every span. Confirm the bearing direction, loads, clear span and material before ordering. Panel size does not indicate the allowable unsupported span.
WHY USE STEEL GRATING?
Advantages for Steel Grating Applications
Load-Matched Panel Options
Bearing bar sections and support spacing can be selected for the actual span and service loads. Production walkways and heavier maintenance areas can be specified separately, using verified load data for each panel arrangement.
Drainage Through the Open Grid
Open panels allow rainwater and washdown water to drain through the floor, helping reduce standing water around equipment and on exterior routes. Drainage openings still require cleaning to prevent blockage by process debris.
Serrated Surface Option
Serrated bearing bars provide additional footwear contact for areas exposed to moisture, oil, or process residue. Choose the profile for the site conditions and confirm its capacity for the specified load and support span.
Finish Options for Site Exposure
Hot-dip galvanizing, paint systems, or other specified materials can be selected according to humidity, coastal conditions, chemical exposure, and maintenance needs. Coating and fastener compatibility should be checked for each installation area.
Access to Equipment and Services
Removable panels and coordinated openings provide access to cables, pipes, valves, and machinery below platforms. Defined panel locations and manageable handling weights support planned inspections and maintenance work.
Fabrication to Factory Layouts
Panels can be cut, banded, and reinforced around columns, ducts, cable routes, and equipment. Fabrication from approved drawings helps coordinate joints, bearing direction, supports, and site installation requirements.
04 / INSTALLATION & PROJECT PHOTOS
Installation Guidance & Application Photos
Review the panel layout, support conditions, fixing methods and fabrication details before installation, and refer to the application photos for practical examples.
-
Check Supports and Design Loads
Verify support positions, clear spans, elevations, and required end bearing against approved drawings. Confirm uniform and concentrated loads, coating requirements, and local exposure conditions before installing the panels.
-
Place Panels in the Correct Direction
Match panel identification to the layout and orient bearing bars across the designated supports. Check joints, stair transitions, cut-outs, equipment clearances, and removable sections. Do not cut bearing bars or change supports without design approval.
-
Install the Specified Fixings
Secure panels with the specified clips, retaining plates, or welds and follow the required tightening procedure. Confirm that removable sections remain restrained during use. Repair any approved site damage to galvanized surfaces using the specified method.
-
Inspect the Access Surface
Check for rocking panels, loose fixings, unsupported edges, sharp projections, excessive deflection, and blocked drainage. Verify stair connections and edge protection, then establish routine inspections for corrosion, wear, contamination, and fixing movement.
05 / RELATED REFERENCE & FAQ
Frequently Asked Questions
Which steel grating is suitable for industrial factories in Kenya?
The suitable type depends on the factory use, loads, support spans, and environmental exposure. Hot-dip galvanized carbon steel is commonly considered for suitable outdoor or humid areas, while painted systems or other materials may suit different conditions. Coastal salt exposure, chemicals, washdown, and maintenance practices should be assessed for each location.
Is hot-dip galvanized grating suitable for coastal factory locations?
It can be suitable for many outdoor applications, but coastal salt exposure can affect coating life and maintenance needs. Specify the required galvanizing standard and coating inspection, and assess fasteners and supporting steel as part of the same system. More severe exposure may require an alternative project-approved material or protective system.
What bearing bar sizes are available for factory platforms?
Typical options include 25 × 3, 30 × 3, 30 × 5, 32 × 5, and 40 × 5 mm, with heavier sections such as 50 × 5, 50 × 6, or 60 × 6 mm for some applications. Final selection depends on span, spacing, loads, support details, and deflection limits.
Should factory walkways use plain or serrated grating?
Serrated grating may be considered where water, oil, or process residue affects footing. Plain grating can suit clean, protected areas after assessment. Neither surface removes the need for cleaning and suitable drainage. Check the selected profile’s load data and consider the actual contaminant and footwear used at the site.
Can grating panels be made to fit existing factory structures?
Yes. Panels can be fabricated to approved dimensions with banded edges, cut-outs, and reinforcement around columns, pipes, cables, and equipment. Drawings should identify support locations, bearing direction, clearances, and removable access points. Cutting bearing bars or changing support arrangements at site should receive design approval.
What information is needed for a factory grating quotation?
Provide layout drawings, quantities, support spans, bearing direction, uniform and concentrated loads, material grade, bar sizes and spacing, surface profile, finish, and fixing details. Include stair treads, openings, toe plates, removable panels, and site exposure such as coastal air, washdown, chemicals, or outdoor weather.
06 / PROJECT ENQUIRY
Tell Us About Your Walkway
Share your layout and operating requirements so our team can review the grating, fabrication and supply scope.
Send Drawings by Email Discuss on WhatsAppThe email button opens your mail app. Attach your drawings before sending.
Include these details
- Application location and exposure conditions
- Drawings, panel dimensions and quantities
- Support layout, clear span and design loads
- Material, finish and walking-surface requirements
- Cut-outs, fixings and removable access sections
- Destination, required delivery date and project standards
Already have a specification? Send it with your enquiry.

